The InverPro is Aquagem’s high end range, which is integrated with InverSilence Technology, while InverStar is the mid-range. The main difference is the overall performance of InverPro is better than InverStar.

In Auto Inverter mode, when the user set the desired flow rate for his pool, the inverter pool pump will automatically detect the pipe pressure and intelligently adjust the motor speed to ensure a constant flow rate.

In Manual Inverter Mode, the user could manually adjust the running capacity between 30% to 100%.

The InverPro comes with internal 2” thread and 2” external union. There are 4 options for the union, namely 63mm, 50mm, 2 inch and 1.5 inch. So it could be easily used for metric and imperial pipeline.

The InverPro has an optional external relay control, which means it can control the on/off of other devices with input power less than 500W or current less than 2.5A. If the input power of the other device exceeds the requirement (i.e. > 500W), another relay must be added.

The InverPro includes 3 external controls, i.e Digital Input, RS485 or Analog input (0~20mA or 0~10V). So it could be controlled through RS485 or Analog input.

In order to guarantee a constant flow rate and sufficient filtering of the pool water, the basket should be inspected frequently. It must be cleaned when a build-up of rubbish is evident.

The mechanical seal for InverPro is 316. Therefore, this pool pump is suitable for salt concentrations of 3.5%(35g/l).

Mechanical seals, o-rings, gaskets, the impeller, and other elements that seal and rotate are the most worn parts.